How to Set Up ZoogVPN on a MiWiFi Router

Follow these steps to configure ZoogVPN on your MiWiFi router using the L2TP or PPTP protocol.

Step 1: Access the Router Settings

1. Connect your device to the router via Wi-Fi or Ethernet.
2. Open a web browser and go to router.miwifi.com or miwifi.com.
   • If these URLs don’t work, try entering 192.168.31.1 in the address bar.
3. Log in using your admin credentials (default username and password are often found on a sticker under the router).

Step 2: Navigate to the VPN Settings

1. In the router control panel, click Advanced Settings.
2. Select the VPN section from the menu.

Step 3: Add a New VPN Connection

1. Click Add Service.
2. Fill in the required fields as follows:
   • Connection Name: Enter a custom name (e.g., “ZoogVPN”).
   • Protocol Type: Select L2TP (recommended) or PPTP.
   • Server Address: Enter the domain name of the ZoogVPN server you want to connect to.
     • You can find ZoogVPN server addresses here.
   • Username: Enter your ZoogVPN login (from the ZoogVPN app or manual setup page).
   • Password: Enter your ZoogVPN password.

Step 4: Save and Connect

1. Click Save to apply the settings.
2. Select the newly created VPN connection and click Connect.
3. Wait for the router to establish the VPN connection.

Step 5: Verify the VPN Connection

1. 1. 1. Check the VPN status in the router settings — it should say Connected.
      2. To confirm your new IP address, visit “what is my IP address?” and check if it reflects your chosen VPN server location.